Dreamer, in today’s post you will learn an effortless way to make embroidery patches with your embroidery machine in 5 minutes.
How to make your embroidery patches
You will need:
- Thread and needle for embroidery machine
- Scissors
- Embroidery machine
- Felt
- Fleece
- Glue to seal seams
For this project we use the Brother SE425 embroidery machine.
Still, you can do it with any embroidery machine.
Step 1:
Place the fleece in the embroidery hoop.
Step 2:
Check that the fabric is taut and tighten the hoop screw.
We will use 5 x 5 inches felt fabric.
Step 3:
Now, pin the fabric.
Step 4:
Use the embroidery sheet to ensure you don’t go over the edges of the needles.
Step 5:
Place the hoop on the embroidery unit carriage.
Step 6:
Enter the menu Default designs, and select the design of your preference.
Step 7:
Lower the presser foot and start embroidering.
Step 8:
When the embroidery is complete, return to the menu and select the frame pattern shape of your preference.
Step 9:
Check the design is centered and start embroidering.
Step 10:
Remove the hoop from the machine and cut the outline of the patch.
Make sure you are cutting the closest to the seam.
Step 11:
Finally, apply a little bit of glue to seal seams around the contour of the patch.
Ready!
Let the patch dry, and it will be ready!
If you want to do this project, add a fun detail to the children’s clothes or renew them by applying a patch with their favorite designs.
Also we prepared a step-by-step video tutorial for you. Check it out.
We hope you enjoyed this post and start customizing your garments with this fun embroidery applique.
It’s so easy to do! If you try this project, don’t forget to share it with us in the comment box.
See you in another post! and… Bye for now!