Hearts decoration Origami on fabric

Origami-fabric-hearts

Dreamer, in this post, we will show you a step-by-step idea to make a hearts decoration with origami on fabric.

It’s a straightforward project requiring no sewing, and you can use those fabric remnants that always are kept.

Prepare your fabrics, iron, and get to work!

You need:

Origami-fabric-hearts-materials
  • Fabric scraps (we recommend cotton fabrics with the print of your choice).
  • Wonder tape
  • Laces, calculate 20-40 in for each square.
  • Scissors and rotary cutter
  • Ruler
  • Cutting surface
  • Finger presser
  • Iron

Step 1:

Mark and cut squares on the fabric scraps; it doesn’t matter if they have different sizes.

  • But we recommend that the smallest is 15 cm so you can manipulate the fabric easier.
hearts-decoration-step1

Step 2:

Preheat your iron to the appropriate temperature for the fabric you are working with.

To iron the fabric squares and fold them in half, marking the fold in the center.

Work all the folds on an ironing board and iron each fold to help you mark and maintain the shape of the fabric.

Origami-fabric-hearts-step2

Step 3:

Place the fabric’s back side facing up. Match the top edge of the square with the center line and mark the fold.

Turn the piece right side up and fold the top corners to the center.

Step 4:

Fold the top cornerback to match it with the center of the bottom edge.

Go back to the front and place two small rectangles. Lift the bottom corner, put your finger inside the fold, and open it to form a triangle in front.

  • Repeat on the other rectangle.
Origami-fabric-hearts-step4

Step 5:

Fold the outside edges down to form small triangles at the top and unfold the piece by pulling the bottom edge up.

Remember to iron each fold; you can use the finger presser to iron small areas to avoid burning.

hearts-decoration-step5

Step 6:

Fold the top two corners to the centerline. Then, pull the left and right corners inward.

Fold the piece in half, matching the top and bottom corners. And place it inside the small pocket.

hearts-decoration-step6

You have finished the heart!

  • Repeat the procedure with all the squares you cut.

Now, place a section of wonder tape in the back center of each heart, and then add the laces of your choice.

Ready!

Place them on your door, window, or wall and add a cute DIY detail.

We hope you have enjoyed this post.

We invite you to check our DIY category for more tutorials and step-by-step posts like this to decorate your home in the holidays!

See you in the following post! Bye for now!

Published by 123 Dream it!

Everything about sewing and embroidery. Ideas, tutorials, step-by-step sewing videos, tips, DIY and much more. Let's share creativity and technique!

Leave a Reply

Your email address will not be published. Required fields are marked *